Technical Datasheet 

VIJ20541LV is a solvent-free, high solids content, low viscous Phenalkamine curing agent. It has excellent rapid cure properties, even at low temperature and provides good adhesion on wet or otherwise unprepared surfaces. It can be also used for potable pipe coating or tank coating applications. This product has outstanding water resistance and corrosion protection properties with good mechanical strength.

Typical Properties

PropertyTypical Value
AppearanceOrange - red
Color (Gardner)13 to 15
Viscosity at 25°C ( cPs ) 1500 – 3500
Amine value ( mgKOH/g )320 – 345
Volatile Losssolvent free
Recommended Use Level with epoxy resin (EEW 190)100 : 60 - 65

* Tested at recommended phr with liquid epoxy resin EEW equal to 190

Performance Properties

VIJ20541 LV
Liquid Epoxy resin (EEW190)100 gm
Hardener VIJ20541 LV 60 - 65 gm
Gel time at 25˚ C40 - 45 minutes
Hard dry time at 25 ˚C7 hours
Appearance of the filmclear film with high gloss


  1. High solid coatings.
  2. Adhesives.
  3. Flooring and constructions.
  4. Marine and industrial coatings.
  5. Surface tolerant primers for metallic substrates.
  6. Potable water coating for tank lining and pipe coating.

Stability and Storage

Phenalkamine may absorbs moisture and carbon dioxide when left in open container, which could result in increased viscosity, discoloration, reduction of reactivity , and/or crystallization of the products. This products should be kept tightly sealed in their in original container when not in use, and store in a cold, dry place. Expiry of the products is six months from the date of manufacture.

We're here to help you get started in the right direction with your project.