Phenalkamides

  • Home
  • Phenalkamides

Phenalkamide is a new generation epoxy curing agent created by chemically combining polyamide and phenalkamine. technologies into a single hybrid system. It bridges the performance gap between these two chemistries, delivering a balanced and versatile curing platform for advanced coating applications.

Our Phenalkamides are also available in regular color grade

Performance Advantages:
Rapid development of early hardness
Cost effective system
Reduced induction time
Ambient cure at 5°C
Lower Tg gradient during cure
Minimized internal stress

Our Most Recommended Products

VIJ 2026

Used for Concrete Flooring

  • Low-viscosity Phenalkamide for concrete floor coating systems
  • Allows high filler loading
  • Enhanced mechanical strength
  • Superior floor system performance

VIJ 2025 | VIJ 2030

Used for Waterproofing & Tank Lining

  • Superior substrate wetting
  • Excellent mechanical strength & chemical resistance
  • VIJ 2030 is excellent choice for protective coatings
  • Low shrinkage and excellent adhesion
  • Lite VIJ 2025 can be used for coving

VIJ 2024 | VIJ 2030 | VIJ 2027

Used for Protective & Marine Coating

  • High solid epoxy system component
  • Excellent corrosion resistance
  • Superior adhesion to steel and alloys
  • Long-term durability in harsh environments
  • Lite VIJ 2030 is rapid curing suitable for Protective Coating Application

LITE VIJ 2024 MD | VIJ 2028

Used for Adhesive & Sealants

  • Majorly used in epoxy adhesive formulations
  • Good flexibility
  • Suitable for severe exposure conditions
  • Can be applied in low temperatures

Phenalkamides / Lite Phenalkamides

Hybrid epoxy curing technology combining the advantages of polyamide and phenalkamine chemistries.

Features
  • Hybrid chemistry of Polyamide & Phenalkamine
  • Good color stability
  • Low Temperature Curing
  • Cost effective
  • Fast Curing with good flexibility
  • Versatile All Season Performance
  • Excellent Wet Recoatability Performance
Phenalkamides Product
PHENALKAMIDE
Product Viscosity @ 25˚C(cps) Colour (Gardner) Amine Value (mgKOH/g) AHEW PHR With Epoxy resin (EEW=190) Gel Time @ 25˚C(Min.) Thin film Dry Hard Time(Hours) 25˚C Special Features Documents
VIJ 2024 35000 - 45000 12 - 13 230 - 270 160 82 - 86 70 - 80 6 High-viscosity, rapid drying, excellent water resistance, and good flexibility. TDS | MSDS
VIJ 2025 8000 - 12000 12 - 13 380 - 400 97 50 - 55 50 - 60 6 Low viscosity, fast drying for solvent-free coatings, with excellent adhesion and corrosion protection. TDS | MSDS
VIJ 2026 1000 - 2000 12 - 13 340 - 380 125 60 35 - 50 3.5 Lower viscosity, good flexibility, corrosion resistance, good adhesion TDS | MSDS
VIJ 2027 800 - 1300 12 - 13 440 - 470 100 50 50 - 70 8 Low viscosity, outstanding mechanical stability, good corrosion resistance, good adhesion TDS | MSDS
VIJ 2028 25000 - 35000 12 - 13 330 - 360 125 65 40 - 50 5 High-viscosity phenalkamide for advanced two-pack adhesive systems. TDS | MSDS
VIJ 2029 4000 - 6000 (50°C) MAX 15 190 - 250 190 100 50 - 70 5 Fast hardness development, good anticorrosion performance, cost effective compared to polyamides TDS | MSDS
VIJ 2030 4000 - 6000 MAX 13 240 - 280 150 75 60 - 80 4 Suitable for high-solids applications, it exhibits the benefits of both polyamide and phenalkamine systems. TDS | MSDS
VIJ 2024X80 4000 - 8000 MAX 15 190 - 230 260 - 340 57 with VIJ 5055X75 >100 1.5 Solid content (80%), phenalkamide with good reactivity, excellent corrosion resistance on metal surfaces, and suitable viscosity for high film-build applications. TDS | MSDS
LITE PHENALKAMIDE
Product Viscosity @ 25˚C(cps) Colour (Gardner) Amine Value (mgKOH/g) AHEW PHR With Epoxy resin (EEW=190) Gel Time @ 25˚C(Min.) Thin film Dry Hard Time(Hours) 25˚C Special Features Documents
Lite VIJ 2024 35000 - 45000 MAX 10 230 - 270 160 82 - 86 70 - 80 6 High-viscosity, rapid drying, excellent water resistance, and good flexibility. TDS | MSDS
LITE VIJ 2024 MD 30000 - 40000 MAX 10 230 - 270 160 82 - 86 70 - 80 7 High-viscosity, rapid drying, excellent water resistance and good flexibility. TDS | MSDS
Lite VIJ 2025 8000 - 12000 MAX 10 380 - 400 97 50 - 55 50 - 60 8 Low viscosity, fast drying for solvent-free coatings, with excellent adhesion and corrosion protection. TDS | MSDS
Lite VIJ 2026 1000 - 2000 MAX 10 340 - 380 125 60 40 - 55 3.5 Lower viscosity, good flexibility, corrosion resistance, good adhesion TDS | MSDS
Lite VIJ 2027 800 - 1300 MAX 10 410 - 450 100 50 50 - 70 8 Low viscosity, outstanding mechanical stability, good corrosion resistance, good adhesion TDS | MSDS
Lite VIJ 2028 25000 - 35000 MAX 10 330 - 360 125 65 40 - 50 5 High-viscosity phenalkamide for advanced two-pack adhesive systems. TDS | MSDS
LITE VIJ 2029 25000 - 35000 MAX 10 190 - 250 190 100 50 - 70 5 Fast hardeness development, good anticorrosion performance, cost effective compared to polyamides TDS | MSDS
LITE VIJ 2030 4000 - 6000 MAX 10 240 - 280 150 75 60 - 80 4 Suitable for high-solids applications, it exhibits the benefits of both polyamide and phenalkamine systems. TDS | MSDS
LITE VIJ 2024X80 4000 - 8000 MAX 10 190 - 230 180 - 230 57 with VIJ 5055X75 >100 1.5 Solid content (80%), phenalkamide with good reactivity, excellent corrosion resistance on metal surfaces, and suitable viscosity for high film-build applications. TDS | MSDS

© 2026 Vijai Poly Products Pvt. Ltd All Rights Reserved. Design By Moreweb Solutions